Heat treatment of cold drawn seamless steel pipe:

(1)cold drawn steel annealing: refers to the metal material is heated to the appropriate temperature, to maintain a certain time, and then slowly cooled heat treatment process. Common annealing process are: recrystallization annealing, stress relieving, ball annealing, fully annealed and so on. The purpose of annealing: mainly to reduce the hardness of the metal material, to improve the plasticity, or cutting processing to Liqie pressure processing, reduce the residual stress and improve the uniformity of microstructure and composition, heat treatment, after possible or tissue preparation.

(2)cold drawn steel normalizing: refers to the heating of steel or steel to Ac3 or Acm (the critical temperature of steel) over 30 ~ 50 ℃, after an appropriate time to keep cool in still air in the heat treatment process . The purpose of normalizing: mainly to improve the mechanical properties of low carbon steel to improve machinability, grain refinement, elimination of tissue defects, prepare for the heat treatment, after tissue preparation.

(3)cold drawn steel hardening: refers to the heated steel Ac3 or Ac1 (lower critical temperature of steel) above a certain temperature for a certain time, then the appropriate cooling rate to obtain martensite (or shellfish Heat Treatment’s body) tissue. Common salt bath quenching process has hardened, martensitic quenching, Austempering, surface hardening and partial quenching. Quenching purpose: to make the steel needed to obtain martensite improve workpiece hardness, strength and wear resistance, heat treatment, after prepare for the organization and preparation.

(4)cold drawn steel tempered: that after hardened steel, and then heated to a temperature below Ac1, holding a certain time, and then cooled to room temperature, the heat treatment process. Common tempering process are: tempering, tempering, tempering and multiple tempering. The purpose of tempering: mainly steel eliminate stress produced during quenching, the steel having high hardness and wear resistance, but also has the required plasticity and toughness.

(5)cold drawn steel quenched: refers to the quenching and tempering of steel or composite steel heat treatment process. Used in quenching said steel quenched and tempered steel. It generally refers to the carbon structure of carbon steel and alloy steel.

(6)cold drawn steel chemical treatment: refers to the metal or alloy workpieces placed in a constant temperature of the active medium heat, so that one or several elements into its surface to change its chemical composition, microstructure and properties of the heat treatment process. Common chemical heat treatment process are: carburizing, nitriding, carbonitriding, aluminized boron penetration. The purpose of chemical treatment: The main is to improve the steel surface hardness, wear resistance, corrosion resistance, fatigue strength and oxidation resistance.

(7) cold drawn steel solution treatment: that the alloy is heated to a high temperature single-phase region to maintain a constant temperature, so that the excess phase fully dissolved into the solid solution after rapid cooling, in order to get over the supersaturated solid solution heat treatment process. The purpose of solution treatment: mainly to improve the ductility and toughness of steel and alloys, to prepare for the precipitation hardening treatment and so on.